Upgrades

You can check the current version using the API command:

curl -u $USER:$PASSWORD -X GET http://localhost:9200/_logserver/license

Upgrade from version 7.1.0

Preferred Upgrade steps

Run upgrade script:

./install.sh -u

Required post upgrade

  • (SIEM only) Update user in license-service to license,

  • Update logtrail pipeline in Logstash configuration,

  • Migrate logtrail-* indices to new format (the next call will display the current status of the task):

    for index in logtrail-kibana logtrail-alert logtrail-elasticsearch logtrail-logstash; do curl -XPOST "127.0.0.1:9200/_logserver/prepareindex/$index" -u logserver;done
    

Upgrade from version 7.0.6

Breaking and major changes

  • During the update, the “kibana” role will be removed and replaced by “gui-access”, “gui-objects”, “report”. The three will automatically be assigned to all users that prior had the “kibana” role. If you had a custom role that allowed users to log in to the GUI this WILL STOP WORKING and you will have to manually enable the access for users.
  • The above is also true for LDAP users. If role mapping has been set for role kibana this will have to be manually updated to “gui-access” and if required “gui-objects” and “report” roles.
  • If any changes have been made to the “kibana” role paths, those will be moved to “gui-objects”. GUI objects permissions also will be moved to “gui-objects” for “gui-access” cannot be used as a default role.
  • The “gui-access” is a read-only role and cannot be modified. By default, it will allow users to access all GUI apps; to constrain user access, assign user a role with limited apps permissions.
  • “small_backup.sh” script changed name to “configuration-backup.sh” - this might break existing cron jobs
  • SIEM plan is now a separate add-on package (requires an additional license)
  • Network-Probe is now a separate add-on package (requires an additional license)
  • (SIEM) Verify rpmsave files for alert and restore them if needed for following:
    • /opt/alert/config.yaml
    • /opt/alert/op5_auth_file.yml
    • /opt/alert/smtp_auth_file.yml

Preferred Upgrade steps

  1. Run upgrade script:
    • ./install.sh -u

Required post upgrade

  • Role “wiki” has to be modified to contain only path: “.wiki” and all methods,
  • Configure the License Service according to the Configuration section.

Upgrade from version 7.0.5

General note

  1. Indices .agents, audit, alert indices currently uses rollover for rotation, after upgrade please use dedicated API for migration:
curl -u $USER:$PASSWORD -X POST http://localhost:9200/_logserver/prepareindex/$indexname
  1. Wiki plugin require open port tcp/5603
  2. Update alert role to include index-paths: “.alert”, “alert_status”, “alert_error”, “.alertrules_”, “.risks”, “.riskcategories”, “.playbooks”

Preferred Upgrade steps

  1. Run upgrade script:

    ./install.sh -u
    
  2. Restart services:

    systemctl restart elasticsearch alert kibana cerebro wiki
    
  3. Migrate Audit index to new format (the next call will display the current status of the task):

    curl -XPOST '127.0.0.1:9200/_logserver/prepareindex/audit' -u logserver
    
  4. Migrate Alert index to new format (the next call will display the current status of the task):

    curl -XPOST '127.0.0.1:9200/_logserver/prepareindex/alert' -u logserver
    
  5. Migrate Agents index to new format (the next call will display the current status of the task):

    curl -XPOST '127.0.0.1:9200/_logserver/prepareindex/.agents' -u logserver
    
  6. Open tcp/5603 port for wikipedia plugin:

    firewall-cmd --zone=public --add-port=5603/tcp --permanent
    firewall-cmd --reload
    

Alternative Upgrade steps (without install.sh script)

  1. Stop services:

    systemctl stop elasticsearch alert kibana cerebro
    
  2. Upgrade client-node (includes alert engine):

    yum update ./energy-logserver-client-node-7.0.6-1.el7.x86_64.rpm
    
  3. Upgrade data-node:

    yum update ./energy-logserver-data-node-7.0.6-1.el7.x86_64.rpm
    
  4. Start services:

    systemctl start elasticsearch alert kibana cerebro wiki 
    
  5. Migrate Audit index to new format (the next call will display the current status of the task):

    curl -XPOST '127.0.0.1:9200/_logserver/prepareindex/audit' -u logserver
    
  6. Migrate Alert index to new format (the next call will display the current status of the task):

    curl -XPOST '127.0.0.1:9200/_logserver/prepareindex/alert' -u logserver
    
  7. Migrate Agents index to new format (the next call will display the current status of the task):

    curl -XPOST '127.0.0.1:9200/_logserver/prepareindex/.agents' -u logserver
    
  8. Open tcp/5603 port for wikipedia plugin:

    firewall-cmd --zone=public --add-port=5603/tcp --permanent
    firewall-cmd --reload
    

Upgrade from version 7.0.4

General note

  1. The following indices .agents, audit, alert currently uses rollover for rotation, after upgrade please use dedicated AIP for migration:

    curl -u $USER:$PASSWORD -X POST http://localhost:9200/_logserver/prepareindex/$indexname
    
  2. The Wiki plugin require open port tcp/5603

Preferred Upgrade steps

  1. Run upgrade script:

    ./install.sh -u
    
  2. Restart services:

     systemctl restart elasticsearch alert kibana cerebro wiki
    
  3. Migrate Audit index to new format (the next call will display the current status of the task):

    curl -X POST 'http://localhost:9200/_logserver/prepareindex/audit' -u $USER:$PASSWORD
    
  4. Migrate Alert index to new format (the next call will display the current status of the task):

    curl -XPOST 'http://localhost:9200/_logserver/prepareindex/alert' -u $USER:$PASSWORD
    
  5. Migrate Agents index to new format (the next call will display the current status of the task):

     curl -XPOST 'http://localhost:9200/_logserver/prepareindex/.agents' -u $USER:$PASSWORD
    
  6. Open tcp/5603 port for Wikipedia plugin:

    firewall-cmd --zone=public --add-port=5603/tcp --permanent
    
    firewall-cmd --reload
    

Alternative Upgrade steps (without install.sh script)

  1. Stop services:

    systemctl stop elasticsearch alert kibana cerebro
    
  2. Upgrade client-node (includes alert engine):

    yum update ./energy-logserver-client-node-7.0.5-1.el7.x86_64.rpm
    
  3. Upgrade data-node:

    yum update ./energy-logserver-data-node-7.0.5-1.el7.x86_64.rpm
    
  4. Start services:

    systemctl start elasticsearch alert kibana cerebro wiki
    
  5. Migrate Audit index to new format (the next call will display the current status of the task):

    curl -XPOST 'http://localhost:9200/_logserver/prepareindex/audit' -u $USER:$PASSWORD
    
  6. Migrate Alert index to new format (the next call will display the current status of the task):

    curl -XPOST 'http://localhost:9200/_logserver/prepareindex/alert' -u $USER:$PASSWORD
    
  7. Migrate Agents index to new format (the next call will display the current status of the task):

    curl -XPOST 'http://localhost:9200/_logserver/prepareindex/.agents' -u $USER:$PASSWORD
    
  8. Open tcp/5603 port for Wikipedia plugin:

    firewall-cmd --zone=public --add-port=5603/tcp --permanent
    
    firewall-cmd --reload
    

Upgrade from version 7.0.3

General note

  1. Indicators of compromise (IOCs auto-update) require access to the software provider’s servers.

  2. GeoIP Databases (auto-update) require access to the software provider’s servers.

  3. Archive plugin require ztsd package to work:

    yum install zstd
    

Upgrade steps

  1. Stop services

    systemctl stop elasticsearch alert kibana cerebro
    
  2. Upgrade client-node (includes alert engine):

    yum update ./energy-logserver-client-node-7.0.4-1.el7.x86_64.rpm
    
  3. Upgrade data-node:

    yum update ./energy-logserver-data-node-7.0.4-1.el7.x86_64.rpm
    
  4. Start services:

    systemctl start elasticsearch alert kibana cerebro
    

Upgrade from version 7.0.2

General note

  • Update the kibana role to include index-pattern .kibana*
  • Update the alert role to include index-pattern .alertrules* and alert_status*
  • Install python36 which is required for the Alerting engine on client-node:
yum install python3
  • AD users should move their saved objects from the adrole.
  • Indicators of compromise (IOCs auto-update) require access to the software provider’s servers.
  • GeoIP Databases (auto-update) require access to the software provider’s servers.

Upgrade steps

  • Stop services
systemctl stop elasticsearch alert kibana
  • Upgrade client-node (includes alert engine)
yum update ./energy-logserver-client-node-7.0.3-1.el7.x86_64.rpm
  • Login in the GUI Energy Logserver and go to the Alert List on the Alerts tab and click SAVE button

../_images/image143.png

  • Start alert and kibana service
systemctl start alert kibana
  • Upgrade data-node
yum update ./energy-logserver-data-node-7.0.3-1.el7.x86_64.rpm
  • Start services
systemctl start elasticsearch alert

Extra note

If the Elasticsearch service has been started on the client-node, then it is necessary to update the client.rpm and data.rpm packages on the client node.

After update, you need to edit:

/etc/elasticsearch/elasticsearch.yml

and change:

node.data: false

Additionally, check the file:

elasticsearch.yml.rpmnew

and complete the configuration in elasticsearch.yml with additional lines.

Upgrade from version 7.0.1

General note

  • Update the kibana role to include index-pattern .kibana*
  • Update the alert role to include index-pattern .alertrules* and alert_status*
  • Install python36 which is required for the Alerting engine
yum install python3 on client-node
  • AD users should move their saved objects from the adrole.
  • Indicators of compromise (IOCs auto-update) require access to the software provider’s servers.
  • GeoIP Databases (auto-update) require access to the software provider’s servers.

Upgrade steps

  • Stop services
systemctl stop elasticsearch alert kibana
  • Upgrade client-node (includes alert engine)
yum update ./energy-logserver-client-node-7.0.2-1.el7.x86_64.rpm
  • Login in the GUI Energy Logserver and go to the Alert List on the Alerts tab and click SAVE button

../_images/image143.png

  • Start alert and kibana service
systemctl start alert kibana
  • Upgrade data-node
yum update ./energy-logserver-data-node-7.0.2-1.el7.x86_64.rpm
  • Start services
systemctl start elasticsearch alert

Extra note

If the Elasticsearch service has been started on the client-node, then it is necessary to update the client.rpm and data.rpm packages on the client node.

After update, you need to edit:

/etc/elasticsearch/elasticsearch.yml

and change:

node.data: false

Additionally, check the file:

elasticsearch.yml.rpmnew

and complete the configuration in elasticsearch.yml with additional lines.

Upgrade from 6.x

Before upgrading to Energy Logserver from 6.x OpenJDK / Oracle JDK version 11:

yum -y -q install java-11-openjdk-headless.x86_64

And select default command for OpenJDK /Oracle JDK:

alternatives --config java

The update includes packages:

  • energy-logserver-data-node
  • energy-logserver-client-node

Pre-upgrade steps for data node

  1. Stop the Logstash service

    systemctl stop logstash
    
  2. Flush sync for indices

    curl -sS -X POST "localhost:9200/_flush/synced?pretty" -u$USER:$PASSWORD
    
  3. Close all indexes with production data, except system indexes (the name starts with a dot .), example of query:

    for i in `curl -u$USER:$PASSWORD "localhost:9200/_cat/indices/winlogbeat*?h=i"` ; do curl -u$USER:$PASSWORD -X POST localhost:9200/$i/_close ; done
    
  4. Disable shard allocation

    curl -u$USER:$PASSWORD -X PUT "localhost:9200/_cluster/settings?pretty" -H 'Content-Type: application/json' -d' { "persistent": {"cluster.routing.allocation.enable": "none"}}'
    
  5. Check Cluster Status

    export CREDENTIAL="logserver:logserver"
    
    curl -s -u $CREDENTIAL localhost:9200/_cluster/health?pretty
    

    Output:

    {
        "cluster_name" : "elasticsearch",
        "status" : "green",
        "timed_out" : false,
        "number_of_nodes" : 1,
        "number_of_data_nodes" : 1,
        "active_primary_shards" : 25,
        "active_shards" : 25,
        "relocating_shards" : 0,
        "initializing_shards" : 0,
        "unassigned_shards" : 0,
        "delayed_unassigned_shards" : 0,
        "number_of_pending_tasks" : 0,
        "number_of_in_flight_fetch" : 0,
        "task_max_waiting_in_queue_millis" : 0,
        "active_shards_percent_as_number" : 100.0
       }
    
  6. Stop Elasticsearch service

    systemctl stop elasticsearch
    

Upgrade Energy Logserver Data Node

  1. Upload Package

    scp ./energy-logserver-data-node-7.0.1-1.el7.x86_64.rpm root@hostname:~/
    
  2. Upgrade Energy Logserver Package

    yum update ./energy-logserver-data-node-7.0.1-1.el7.x86_64.rpm
    

    Output:

    Loaded plugins: fastestmirror
    Examining ./energy-logserver-data-node-7.0.1-1.el7.x86_64.rpm:       energy-logserver-data-node-7.0.1-1.el7.x86_64
    Marking ./energy-logserver-data-node-7.0.1-1.el7.x86_64.rpm as an    update to energy-logserver-data-node-6.1.8-1.x86_64
    Resolving Dependencies
    --> Running transaction check
    ---> Package energy-logserver-data-node.x86_64 0:6.1.8-1 will be    updated
    ---> Package energy-logserver-data-node.x86_64 0:7.0.1-1.el7 will be an update
    --> Finished Dependency Resolution
    
    Dependencies Resolved
    =======================================================================================================================================================================================
     Package                                        Arch                          Version                            Repository                                                          Size
    ========================================================================  ========================================================================  =======================================
    Updating:
     energy-logserver-data-node                     x86_64                        7.0.1-1.el7                        /energy-logserver-data-node-   7.0.1-1.el7.x86_64                     117 M
    
    Transaction Summary
    =======================================================================================================================================================================================
    Upgrade  1 Package
    
    Total size: 117 M
    Is this ok [y/d/N]: y
    Downloading packages:
    Running transaction check
    Running transaction test
    Transaction test succeeded
    Running transaction
      Updating   : energy-logserver-data-node-7.0.1-1.el7.x86_64                                                                                                                       1/2
    Removed symlink /etc/systemd/system/multi-   user.target.wants/elasticsearch.service.
    Created symlink from /etc/systemd/system/multi-   user.target.wants/elasticsearch.service to    /usr/lib/systemd/system/elasticsearch.service.
      Cleanup    : energy-logserver-data-node-6.1.8-1.x86_64                                                                                                                           2/2
      Verifying  : energy-logserver-data-node-7.0.1-1.el7.x86_64                                                                                                                       1/2
      Verifying  : energy-logserver-data-node-6.1.8-1.x86_64                                                                                                                           2/2
    
    Updated:
      energy-logserver-data-node.x86_64 0:7.0.1-1.el7
    
    Complete!
    
  3. Verification of Configuration Files

    Please, verify your Elasticsearch configuration and JVM configuration in files:

     - /etc/elasticsearch/jvm.options – check JVM HEAP settings and another parameters
    
    grep Xm /etc/elasticsearch/jvm.options <- old configuration file
    ## -Xms4g
    ## -Xmx4g
    # Xms represents the initial size of total heap space
    # Xmx represents the maximum size of total heap space
    -Xms600m
    -Xmx600m
    
    cp /etc/elasticsearch/jvm.options.rpmnew /etc/elasticsearch/jvm.options
    cp: overwrite ‘/etc/elasticsearch/jvm.options’? y
    
    vim /etc/elasticsearch/jvm.options
    
    • /etc/elasticsearch/elasticsearch.yml – verify elasticsearch configuration file
    • compare exiting /etc/elasticsearch/elasticsearch.yml and /etc/elasticsearch/elasticsearch.yml.rpmnew
  4. Start and enable Elasticsearch service If everything went correctly, we will restart the Elasticsearch instance:

    systemctl restart elasticsearch
    systemctl reenable elasticsearch
    
    systemctl status elasticsearch
    ● elasticsearch.service - Elasticsearch
       Loaded: loaded (/usr/lib/systemd/system/elasticsearch.service; enabled; vendor preset: disabled)
       Active: active (running) since Wed 2020-03-18 16:50:15 CET; 57s ago
         Docs: http://www.elastic.co
     Main PID: 17195 (java)
       CGroup: /system.slice/elasticsearch.service
               └─17195 /etc/alternatives/jre/bin/java -Xms512m -Xmx512m -Djava.security.manager -Djava.security.policy=/usr/share/elasticsearch/plugins/elasticsearch_auth/plugin-securi...
    
    Mar 18 16:50:15 migration-01 systemd[1]: Started Elasticsearch.
    Mar 18 16:50:25 migration-01 elasticsearch[17195]: SSL not activated for http and/or transport.
    Mar 18 16:50:33 migration-01 elasticsearch[17195]: SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
    Mar 18 16:50:33 migration-01 elasticsearch[17195]: SLF4J: Defaulting to no-operation (NOP) logger implementation
    Mar 18 16:50:33 migration-01 elasticsearch[17195]: SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
    
  5. Check cluster/indices status and Elasticsearch version

    Invoke curl command to check the status of Elasticsearch:

    curl -s -u $CREDENTIAL localhost:9200/_cluster/health?pretty
    {
      "cluster_name" : "elasticsearch",
      "status" : "green",
      "timed_out" : false,
      "number_of_nodes" : 1,
      "number_of_data_nodes" : 1,
      "active_primary_shards" : 25,
      "active_shards" : 25,
      "relocating_shards" : 0,
      "initializing_shards" : 0,
      "unassigned_shards" : 0,
      "delayed_unassigned_shards" : 0,
      "number_of_pending_tasks" : 0,
      "number_of_in_flight_fetch" : 0,
      "task_max_waiting_in_queue_millis" : 0,
      "active_shards_percent_as_number" : 100.0
    }
    
    curl -s -u $CREDENTIAL localhost:9200
    {
      "name" : "node-1",
      "cluster_name" : "elasticsearch",
      "cluster_uuid" : "igrASEDRRamyQgy-zJRSfg",
      "version" : {
        "number" : "7.3.2",
        "build_flavor" : "oss",
        "build_type" : "rpm",
        "build_hash" : "1c1faf1",
        "build_date" : "2019-09-06T14:40:30.409026Z",
        "build_snapshot" : false,
        "lucene_version" : "8.1.0",
        "minimum_wire_compatibility_version" : "6.8.0",
        "minimum_index_compatibility_version" : "6.0.0-beta1"
      },
      "tagline" : "You Know, for Search"
    }
    
  6. Install new version of default base template

curl -k -XPUT -H 'Content-Type: application/json' -u logserver:logserver 'http://127.0.0.1:9200/_template/default-base-template-0' -d@/usr/share/elasticsearch/default-base-template-0.json

If everything went correctly, we should see 100% allocated shards in cluster health. However, while connection on port 9200/TCP we can observe a new version of Elasticsearch.

Post-upgrade steps for data node

  1. Start Elasticsearch service

    systemctl statrt elasticsearch
    
  2. Delete .auth index

    curl -u$USER:$PASSWORD -X DELETE localhost:9200/.auth
    
  3. Use elasticdump to get all templates and load it back

    • get templates
    /usr/share/kibana/elasticdump/elasticdump  --output=http://logserver:logserver@localhost:9200 --input=templates_elasticdump.json --type=template
    
    • delete templates
    for i in `curl -ss -ulogserver:logserver http://localhost:9200/_cat/templates | awk '{print $1}'`; do curl -ulogserver:logserver -XDELETE http://localhost:9200/_template/$i ; done
    
    • load templates
    /usr/share/kibana/elasticdump/elasticdump  --input=http://logserver:logserver@localhost:9200 --output=templates_elasticdump.json --type=template
    
  4. Open indexes that were closed before the upgrade, example of query:

    curl -ss -u$USER:$PASSWORD "http://localhost:9200/_cat/indices/winlogbeat*?h=i,s&s=i" |awk '{if ($2 ~ /close/) system("curl -ss -u$USER:$PASSWORD -XPOST http://localhost:9200/"$1"/_open?pretty")}'
    
  5. Start the Logstash service

    systemctl start logstash
    
  6. Enable Elasticsearch allocation

    curl -sS -u$USER:$PASSWORD -X PUT "http://localhost:9200/_cluster/settings?pretty" -H 'Content-Type: application/json' -d' { "persistent": {"cluster.routing.allocation.enable": "none"}}'
    
  7. After starting on GUI remove aliases .kibana* (double version of index patterns)

    curl -u$USER:$PASSWORD "http://localhost:9200/.kibana_1/_alias/_all" -XDELETE
    

Upgrade Energy Logserver Client Node

  1. Upload packages

    • Upload new rpm by scp/ftp:
    scp ./energy-logserver-client-node-7.0.1-1.el7.x86_64.rpm root@hostname:~/
    
    • Backup report logo file.
  2. Uninstall old version Energy Logserver GUI

    • Remove old package:
    systemctl stop kibana alert
    
    yum remove energy-logserver-client-node
    Loaded plugins: fastestmirror
    Resolving Dependencies
    --> Running transaction check
    ---> Package energy-logserver-client-node.x86_64 0:6.1.8-1 will be erased
    --> Finished Dependency Resolution
    
    Dependencies Resolved
    
    =======================================================================================================================================================================================
     Package                                           Arch                        Version                        Repository                                                          Size
    =======================================================================================================================================================================================
    Removing:
     energy-logserver-client-node                      x86_64                      6.1.8-1                        @/energy-logserver-client-node-6.1.8-1.x86_64                      802 M
    
    Transaction Summary
    =======================================================================================================================================================================================
    Remove  1 Package
    
    Installed size: 802 M
    Is this ok [y/N]: y
    Downloading packages:
    Running transaction check
    Running transaction test
    Transaction test succeeded
    Running transaction
      Erasing    : energy-logserver-client-node-6.1.8-1.x86_64                                                                                                                         1/1
    warning: file /usr/share/kibana/plugins/node_modules.tar: remove failed: No such file or directory
    warning: /etc/kibana/kibana.yml saved as /etc/kibana/kibana.yml.rpmsave
      Verifying  : energy-logserver-client-node-6.1.8-1.x86_64                                                                                                                         1/1
    
    Removed:
      energy-logserver-client-node.x86_64 0:6.1.8-1
    
    Complete!
    
  3. Install new version

    • Install dependencies:

      yum install net-tools mailx gtk3 libXScrnSaver ImageMagick ghostscript
      
    • Install new package:

      yum install ./energy-logserver-client-node-7.0.1-1.el7.x86_64.rpm
      Loaded plugins: fastestmirror
      Examining ./energy-logserver-client-node-7.0.1-1.el7.x86_64.rpm: energy-logserver-client-node-7.0.1-1.el7.x86_64
      Marking ./energy-logserver-client-node-7.0.1-1.el7.x86_64.rpm to be installed
      Resolving Dependencies
      --> Running transaction check
      ---> Package energy-logserver-client-node.x86_64 0:7.0.1-1.el7 will be installed
      --> Finished Dependency Resolution
      
      Dependencies Resolved
      
      =======================================================================================================================================================================================
       Package                                         Arch                      Version                           Repository                                                           Size
      =======================================================================================================================================================================================
      Installing:
       energy-logserver-client-node                    x86_64                    7.0.1-1.el7                       /energy-logserver-client-node-7.0.1-1.el7.x86_64                    1.2 G
      
      Transaction Summary
      =======================================================================================================================================================================================
      Install  1 Package
      
      Total size: 1.2 G
      Installed size: 1.2 G
      Is this ok [y/d/N]: y
      Downloading packages:
      Running transaction check
      Running transaction test
      Transaction test succeeded
      Running transaction
        Installing : energy-logserver-client-node-7.0.1-1.el7.x86_64                                                                                                                     1/1
      Generating a 2048 bit RSA private key
      ..............................................................................................+++
      ...........................................................................................................+++
      writing new private key to '/etc/kibana/ssl/kibana.key'
      -----
      Removed symlink /etc/systemd/system/multi-user.target.wants/alert.service.
      Created symlink from /etc/systemd/system/multi-user.target.wants/alert.service to /usr/lib/systemd/system/alert.service.
      Removed symlink /etc/systemd/system/multi-user.target.wants/kibana.service.
      Created symlink from /etc/systemd/system/multi-user.target.wants/kibana.service to /usr/lib/systemd/system/kibana.service.
      Removed symlink /etc/systemd/system/multi-user.target.wants/cerebro.service.
      Created symlink from /etc/systemd/system/multi-user.target.wants/cerebro.service to /usr/lib/systemd/system/cerebro.service.
        Verifying  : energy-logserver-client-node-7.0.1-1.el7.x86_64                                                                                                                     1/1
      
      Installed:
        energy-logserver-client-node.x86_64 0:7.0.1-1.el7
      
      Complete!
      
  4. Start Energy Logserver GUI

    Add service:

    • Kibana
    • Cerebro
    • Alert

    to autostart and add port ( 5602/TCP ) for Cerebro. Run them and check status:

    firewall-cmd –permanent –add-port 5602/tcp
    firewall-cmd –reload
    
    systemctl enable kibana cerebro alert
    Created symlink from /etc/systemd/system/multi-user.target.wants/kibana.service to /usr/lib/systemd/system/kibana.service.
    Created symlink from /etc/systemd/system/multi-user.target.wants/cerebro.service to /usr/lib/systemd/system/cerebro.service.
    Created symlink from /etc/systemd/system/multi-user.target.wants/alert.service to /usr/lib/systemd/system/alert.service.
    systemctl start kibana cerebro alert
    systemctl status kibana cerebro alert
    ● kibana.service - Kibana
       Loaded: loaded (/usr/lib/systemd/system/kibana.service; enabled; vendor preset: disabled)
       Active: active (running) since Thu 2020-03-19 14:46:52 CET; 2s ago
     Main PID: 12399 (node)
       CGroup: /system.slice/kibana.service
               └─12399 /usr/share/kibana/bin/../node/bin/node --no-warnings --max-http-header-size=65536 /usr/share/kibana/bin/../src/cli -c /etc/kibana/kibana.yml
    
    Mar 19 14:46:52 migration-01 systemd[1]: Started Kibana.
    
    ● cerebro.service - Cerebro
       Loaded: loaded (/usr/lib/systemd/system/cerebro.service; enabled; vendor preset: disabled)
       Active: active (running) since Thu 2020-03-19 14:46:52 CET; 2s ago
     Main PID: 12400 (java)
       CGroup: /system.slice/cerebro.service
               └─12400 java -Duser.dir=/opt/cerebro -Dconfig.file=/opt/cerebro/conf/application.conf -cp -jar /opt/cerebro/lib/cerebro.cerebro-0.8.4-launcher.jar
    
    Mar 19 14:46:52 migration-01 systemd[1]: Started Cerebro.
    
    ● alert.service - Alert
       Loaded: loaded (/usr/lib/systemd/system/alert.service; enabled; vendor preset: disabled)
       Active: active (running) since Thu 2020-03-19 14:46:52 CET; 2s ago
     Main PID: 12401 (elastalert)
       CGroup: /system.slice/alert.service
               └─12401 /opt/alert/bin/python /opt/alert/bin/elastalert
    
    Mar 19 14:46:52 migration-01 systemd[1]: Started Alert.

Changing OpenJDK version

Logstash

OpenJDK 11 is supported by Logstash from version 6.8 so if you have an older version of Logstash you must update it.

To update Logstash, follow the steps below:

  1. Back up the following files

    • /etc/logstash/logstash.yml
    • /etc/logstash/piplines.yml
    • /etc/logstash/conf.d
  2. Use the command to check custom Logstash plugins:

    /usr/share/bin/logstash-plugin list --verbose
    

    and note the result

  3. Install a newer version of Logstash according to the instructions:

    https://www.elastic.co/guide/en/logstash/6.8/upgrading-logstash.html

    or

    https://www.elastic.co/guide/en/logstash/current/upgrading-logstash.html

  4. Verify installed plugins:

    /usr/share/bin/logstash-plugin list --verbose
    
  5. Install the missing plugins if necessary:

    /usr/share/bin/logstash-plugin install plugin_name
    
  6. Run Logstash using the command:

    systemctl start logstash
    

Elasticearch

Energy Logserver can use OpenJDK version 10 or later. If you want to use OpenJSK version 10 or later, configure the Elasticsearch service as follows:

  1. After installing OpenJDK, select the correct version that Elasticsearch will use:

    alternative --config java
    
  2. Open the /etc/elasticsearch/jvm.options file in a text editor:

    vi /etc/elasticsearch/jvm.options
    
  3. Disable the OpenJDK version 8 section:

    ## JDK 8 GC logging
    
    #8:-XX:+PrintGCDetails
    #8:-XX:+PrintGCDateStamps
    #8:-XX:+PrintTenuringDistribution
    #8:-XX:+PrintGCApplicationStoppedTime
    #8:-Xloggc:/var/log/elasticsearch/gc.log
    #8:-XX:+UseGCLogFileRotation
    #8:-XX:NumberOfGCLogFiles=32
    #8:-XX:GCLogFileSize=64m
    
  4. Enable the OpenJDK version 11 section

    ## G1GC Configuration
    # NOTE: G1GC is only supported on JDK version 10 or later.
    # To use G1GC uncomment the lines below.
    10-:-XX:-UseConcMarkSweepGC
    10-:-XX:-UseCMSInitiatingOccupancyOnly
    10-:-XX:+UseG1GC
    10-:-XX:InitiatingHeapOccupancyPercent=75
    
  5. Restart the Elasticsearch service

    systemctl restart elasticsearch